KL-X KIRBY LESTER #37 - MODEL KLX COUNTS TABS, CAPS, PILLS- Xtra FINE CONDITION

Description

NOTE. . .YEAGERENO2
; is not affiliated with The Kirby Lester Corp, a division of Capsa Solutions; is not an
Authorized repair dealer; and cannot offer a Kirby Lester Corp.-supported warranty on any device, service or parts.
Kirby Lester Repairs, We'll help you or do it for you.
World Wide Shipping? Reduced Prices.
We will find the best combination of price and shipping cost for you
See below.
THE KIRBY LESTER PILL COUNTING Machine
MODEL KL-X . . .
Of all the pill counting machines made in the last 40 Years,
We think, the
Kirby Lester KL-X machine is the Most Reliable and Dependable. Most Economical to buy, Most Productive, Just as Precise, Accurate, and Fast as any other, EASIEST TO CLEAN and Maintain, Requiring the least amount of Counterspace. It's Lightweight and the cheapest to ship, AND It's the Least Expensive to Repair if ever needed, and therefore:
The BEST CHOICE for your operation
.
This Kirby Counting Machine is a valuable commodity, a Capital Investment for your business, that will hold it’s value in the future, unlike the US Green Back Dollar that is losing value each day because of inflation.
When the govt. prints more and more Fiat, (unbacked)  Currency, this causes inflation, and the prices of everything go up, as the dollar value diminishes.
Just like the value and price increase of Gold, Silver, and Bitcoin, a Kirby Counting Machine is a Hard Asset that holds it’s value or increases in value.
This machine had a previous owner, but it was well taken care of, Extra Fine condition. (Please see pictures) . . . The Tray drawer shows some wear at the edges where the tray is inserted each time the machine is used to perform a count . . . The Cabinet shows no major marks and the cone splitter has the peak in a well defined sharp point and shows only a very slight discoloration on the exterior from the Flourecent lights. . .These are indications of the amount of use.
The Funnel top and other plastic funnel parts have NO CRACKS or CHIPS and exhibit a light even toning. . . . (The plastic parts on Kirby Lester machines are under flourecent lights most of their lives and so there is a slow yellow toning taking place.)
This machine received a few new parts inside during rebuilding. The catch tray is original with NO CRACKS or CHIPS.
(Please See pictures attached that show how this upgrade benefits this machine)
OTHER KIRBY MODELS AVAILABLE . . . SEE LISTINGS IN PICTURES.
OUR GUARANTEE. . . .
P
referred
C
ustomer Status Guarantee . . . Our Service, Parts and Work are Guaranteed, through the
PC
status you earn when first doing business with us. . . We guarantee the part or machine will arrive at your destination, fully operational, and ready to give you several years of accurate dependable service. . . Once you have
PC
status, it is ongoing . . . so later if you ever need any parts or service, the cost will be discounted according to the item. . . Electrical parts are usually never guaranteed, but we even take care of these for
PC
customers.
Questions?. . .
Please Read each Page of the pictures with this offering or the Troubleshooting guide listed as item
#382733217954 elsewhere on Ebay and contact us for an offer thru Ebay. . . .
This is an XF example of a KL-X of manufacture in the Earlier years. . . The Serial number is Etched on the Kirby Lester plaque on the back of the machine. (Some Later models had the serial number stamped on the plate.) It has the Square Red fuse holder on the back that came before the fuse holder on the side during the later years of manufacture.
It  has been
Tested . . . All Electronic Gates are working and it exhibits the full accuracy that all Kirbys are capable of. . .
This type of Kirby Lester machine is very accurate when kept clean.
And this machine is very clean .    (Please See Pictures Below)
This Kirby machine is NOT sold AS IS. . .
They are obtained from reliable sources in very good condition. . Then, each one is tested, and any parts that fail are replaced.
Then, it is retested, and many parts are replaced just because they are worn or weak, and may fail in the future.
After it is cleaned, fully refurbished, and detailed, to look as close to new as possible . . . Then, we test it, once again, for accuracy the 3rd time, and, it must pass, before we put it in our inventory on:
Ebay. . . See Seller: Yeagereno2
Once purchased, we retest your KL-X, for the 4th time, just before carefully packing
***
it for shipment, so that we can,
Guarantee it will
arrive
in perfect working order,
ready to give your operation, many years of productive service.
We also offer a fast inexpensive repair service for KL-X's, KL-15's, KL-15e's and other older Kirbys, with special attention to our preferred customers.
With this reconditioned KL-X
You Get:
30 Day Warranty
KL-X Owners Info
Troubleshooter's Guide to Diagnose & Repair
Last Revised Mar 2020
Original Plastic Catch Tray.
You Also Get:
Extra Frosted Bulb
(2 Total)
Extra Fuse
(2 Total)
Pill contact parts are precision crafted from high impact sturdy plastic material . .
Metal cabinet is Powder Coated light Grey,
and the precision electronic counting boards are protected inside. .
These machines were built to give the greatest accuracy possible, (even better than hand counting on a tray), day in and day out, hour after hour of continuous use, for years and years, and we have all the parts to keep it going for many more years.  . .
These precision counting machines, and replacement parts, are for use in a licensed Pharmacy or Vitamin Filling Operation and can only be sold for such.
Proof of legitimate ligitimate use is required.
"The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. So, do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item."
I am a Licensed Pharmacist and authorized to own this machine. I will comply with any and all laws applicable to this machine . . . My Name and Nevada Pharmacist License number are available upon request.
Questions?. . .
Please Read each Page of the pictures with this offering or the Troubleshooting guide listed as item
#382733217954 elsewhere on Ebay and contact us for an offer thru Ebay . . .
I have used KIRBY LESTER counting machines in the practice of Pharmacy for over 40 years, starting with my first KL-7 in my Pharmacy in 1975, Then 11 years in mail-order Pharmacy, keeping KL-7s, KL-8s, KL-8plus, KL-Xs and
KL-15s operational, fixing broken ones, and replacing parts and for the last 20 years as a relief pharmacist using a KL-X machine each day to achieve daily prescription volume.
. .
Until they were replaced by newer models and no longer available,
KIRBY LESTER Listed the KL-7 at a Retail of
5
in1975
The KL-8 was
95
and the KL-8 plus was
95
in 1985
.
The KL-X retailed at
95 in
1995.
If these were manufactured and sold today, they would cost much more to make.
The KL-X, in todays dollars, would have to retail for at least
95
PLEASE SEE THE PICTURES BELOW OF THE
ACTUAL KIRBY LESTER YOU WILL RECEIVE.
United States Priority Express Mail internationally has recently been reduced in price. Delivery Time is just 3-5 business days to your countries Customs Clearance. Ebay has also reduced their Shipping prices and delivery times.
Contact us about World Wide Shipping and we will find the best combination of price and shipping cost for you.
***
Special packaging for shipping.
Once you receive your Kirby, get it unpacked and established in it’s chosen position in your facility, you can depend on it to give you many years of productive service. .
But,
Your Kirby is at risk
during transit
, due to the rough handling or dropping of the packages by Shippers. The longer the distance a package must travel, the more chance there is of damage. In the past, we have had a problem with damage to about 1 out of 15 machines shipped in the
U.S.
and
Canada
. To effectively keep this damage, in transit, at a minimum, we have just invested in
special cushioning foam inside a fitted box
to protect your fragile Kirby machine.
This packing method was first used on the early KL-8s that were shipped from the
U.K.
to the
U.S.
The Kirby machine was surrounded by 2 inch rubber foam in a precisely sized box.
We are constantly trying different packing and cushioning methods to allow a Kirby Machine to withstand being dropped or thrown. The 2 inch foam surrounding the machine has been found to be the best first step. In addition, we wrap each Kirby in a “Cocoon” of bubble wrap and stretch wrap. And, then use convoluted foam to fill in any spaces. We believe this
new cushioning method will fully protect our Kirbys
in the best manner possible.
Because of our trust in our new special packing method over long distances, we will be
starting to offer world-wide shipping
that was not available to customers in the past.
Please contact us for the best shipping price to your location.
And, if your Kirby should sustain any damage in transit, despite our best efforts to keep this from happening, we will not leave you stranded. Since we
Guarantee your Kirby will be in perfect working order
, we’ll do what ever it takes to get a damaged Kirby in perfect running order or replaced, in the shortest amount of time.
Please
save the fitted box and the foam
, to use for storage, moving, or if your Kirby ever needs to be shipped.
*Exception, Clear capsules are not counted accurately because light beam passes through capsule. . .
WE will have all the replacement parts (New and Used) for these precision KL-X machines for years to come. Please contact us for prices and availability.
We also offer a reasonable repair service, for this model and other KIRBYS.
We buy complete machines or parts, working or not.
Kirby Lester Repairs, We'll help you or do it for you.